Kodak RFS 3570 User Manual page 26

. . . . . . . . . . . . . . . . . . . . . . . . . . . . .
2. Find the SCSI port, also called a SCSI connector, on the back of the
computer (not the back of the Scanner), and determine whether or not
a device (for example a disk drive) is attached. The figures in this
chapter are intended to illustrate a typical Macintosh computer.
3. Select the appropriate instructions from the two sets that follow,
according to whether or not other external SCSI devices are con-
nected.
A. Continue below at "If No External SCSI Devices Are Connected"
B. Or continue at "If External SCSI Devices Are Connected" later in
©
3-4 Installation (Hardware & Software) — Macintosh Computer
BACK OF MACINTOSH COMPUTER
if no external SCSI devices are connected.
this chapter if external SCSI devices are connected.
SCSI Icon
SCSI Port
G