Kodak RFS 3570 User Manual page 192

. . . . . . . . . . . . . . . . . . . . . . . . . . . . .
10. With the fuse facing up, insert the flat end of the fuse holder into the
fuse housing, and slide the pieces together until they snap together.
11. Slide the fuse housing back into the Scanner; be certain that the tab is
aligned properly and that you push the fuse cover until it is flush with
the Scanner.
12. Plug the power cable back into the plug outlet. The Scanner is ready
for use.
©
E-4 Replacing the Fuse
Flat End
G