. . . . . . . . . . . . . . . . . . . . . . . . . . . . .
C. If the single-frame holder adapter is not in the Scanner, put it in
Single-frame
Holder Adapter
. . . insert if not already
The slots on both ends . . .
. . . wrap around
the frame in the Scanner.
place in the Scanner. Do so by holding it in the orientation shown
below with the slots (at the left and right of the adapter) facing
forward, and then slide the slots all the way down over the edges
of the front of the metal frame in the Scanner.
in Scanner.
KOD AK Pr ofessional
RFS 3570 Film Scanner
©
Using the KODAK Driver for Adobe Photoshop (Macintosh)
G
5-9