Installation; Installing The Scanner; Installing The Kodak Driver Software - Kodak i5 50 Series User Manual

2 Installation

Installing the scanner

Installing the Kodak Driver
Software
A-61868 November 2016
If desired, Kodak Alaris Professional Services provides professional
installation and user training. Contact Technical Support for more details at
www.kodakalaris.com/go/IMsupport.
The following installation procedures are for the Kodak i5250/i5250V/i5650/
i5650V Scanners. Installation by a field service representative is included with
the purchase of a Kodak i5650S, i5850, or i5850S Scanner.
This section provides detailed information supporting the Installation Guide
that is provided with your scanner. Follow these steps in the order they are
provided to install your scanner.
NOTES:
• Before you begin, verify that your host PC meets the system requirements
that are provided in Appendix A, Specifications.
• If you have already performed all of the steps in the Installation Guide, skip
this section.
Updated drivers may be available at www.kodakalaris.com/go/scanners.
Do not install the USB cable before installing the Driver Software.
1. Insert the Kodak i5x50 or i5x50V Scanner Installation disk in the disk drive.
The installation program starts automatically.
NOTE: If the disk does not start automatically, open the My Computer
icon on your desktop. Double-click the icon indicating your disk
drive, then double-click on setup.exe.
2. Follow the prompts that are displayed until the installation is complete.
3. Remove the Installation disk from the disk drive.
11