Kodak RFS 3570 User Manual page 180

. . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Message
"File Error: Cannot find
WINASPI.DLL." (Appears
when using the TWAIN
compliant KODAK Driver
after selecting the source.)
D-6 Messages
© G
Possible Cause(s)
The TWAIN compliant
KODAK Driver for ASPI
is installed, but a non-
ASPI SCSI Host Adapter
and not an ASPI
compliant host adapter
is installed in the PC.
The TWAIN compliant
KODAK Driver for ASPI
is installed, as is an ASPI
compliant host adapter,
but the Windows ASPI
files that accompany the
ASPI compliant host
adapter are not installed
in the PC.
Suggested Solution(s)
Obtain an ASPI compliant host
adapter, have a technician install
it, and then try again.
Install the Windows ASPI files
that accompany the ASPI
compliant SCSI host adapter,
then try again.
If for some reason the Windows
ASPI files were not supplied with
your host adapter, contact the
source of the host adapter to
obtain them; then install the files
and try again.
Even though you may have
installed ASPI files for other
operating platforms (for example
for DOS), the Windows ASPI files
must be installed to use the
KODAK Driver.