Table of Contents
Advertisement
2 Installation
Installing the scanner
Installing the Driver
Software - Windows
operating systems
Attaching the output tray
A-61837 September 2016
This section provides detailed information supporting the Installation Guide
that is provided with your scanner. Follow these steps in the order they are
provided to install your scanner.
NOTES:
• If you have already performed all of the steps in the Installation Guide, skip
this section.
• When positioning the scanner, be sure to provide adequate clearance at the
back of the scanner if you will be using the rear document exit. For more
information on the rear document exit, see the section entitled, "Using the
rear document exit" in Chapter 3.
Do not install the USB cable before installing the Driver Software.
1. Insert the Kodak i4250, i4650 and i4850 Scanner Installation disk in the
disk drive. The installation program starts automatically.
NOTE: If the disk does not start automatically, open the My Computer
icon on your desktop. Double-click the icon indicating your disk
drive, then double-click on setup.exe.
2. Follow the prompts that are displayed until the installation is complete.
When you unpack the scanner, the output tray is packed in a separate box.
• Locate the output tray slots on the scanner, align the output tray with the
slots and set the output tray in place.
9
Advertisement
Table of Contents
