. . . . . . . . . . . . . . . . . . . . . . . . . . . . .
2. Orient the dust removal tool as shown below, with the label on the
tool (and the fiber strip) facing the front of the scanner; in this position
the dust removal tool is behind the diffuser.
3. Clean the surface of the diffuser with an up and down motion; make
sure the fiber strip makes contact with the diffuser.
4. Remove the dust removal tool, replace the holder and mask, and
rescan the image.
Dust removal tool
Fiber strip
Diffuser
KODAK Professional
RFS 3570 Film Scanner
THIS SIDE
TOWARD FRONT
OF MACHINE
©
Troubleshooting
G
C-7