Kodak RFS 3570 User Manual page 174

. . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Using the Recalibrate Button
Follow these steps if bubbles still appear in the scanner image after
cleaning the diffuser.
1. Focus the image using the procedure described in Chapter 5
(Macintosh) or 9 (PC).
2. Click the R
3. Follow instructions as they appear on the screen.
4. Click S
Other Recommendations to Avoid "Water
Spots" or "Bubbles"
We suggest that you follow these additional recommendations to avoid
the problem of water spots or bubbles in scanned images.
©
Work in a clean environment if possible.
©
Use the supplied dust cover to cover the scanner whenever it is off.
©
Keep the calibration mask in the scanner during idle times.
©
Keep the film and film holders clean.
©
Use an ionizer to reduce the amount of dust settling on the diffuser.
©
Do NOT use compressed air or liquid cleaners to clean the diffuser.
©
C-8 Troubleshooting
button.
ECALIBRATE
and continue normal scanning activity.
CAN
G