Kodak RFS 3570 User Manual page 36

. . . . . . . . . . . . . . . . . . . . . . . . . . . . .
3. Attach the SCSI terminator (supplied with the Scanner) to the empty
SCSI port on the Scanner, seat the terminator firmly, and pinch the
wire clamps shut.
NOTE: If you are using a Macintosh IIfx Computer, use the black terminator
supplied with the computer; it is not interchangeable with the terminator
supplied with the Scanner.
4. Continue at "Setting the Scanner SCSI Identification Number" later in
this chapter.
©
3-14 Installation (Hardware & Software) — Macintosh Computer
Back of
Macintosh Computer
Back of One or More SCSI Devices
Back of Film Scanner
Step 3
G