Table of Contents
Advertisement
Section 2
SmartMonitor ZS
■ Installing the USB driver
The USB driver must be installed on the personal computer to establish a connection
between the personal computer and the Sensor Controller by the USB interface.
• The exclusive USB driver must be installed only when the Sensor Controller is connected to the
• To install the USB driver, log on as an Administrator or a user with system access rights.
• Install SmartMonitor ZS before installing the USB driver.
• The error message "Failed to pass the Windows logo test" is sometimes displayed at installation.
1.
Turn your PC ON and startup up Windows.
2.
Connect the Sensor Controller to the personal
computer by the USB cable.
"Detected new hardware" will be displayed on the
Windows tool bar, and the [New Hardware Detection Wizard] dialog box will appear.
ZS-L
2-20
User's Manual
personal computer for the first time. From the second startup onwards, the USB driver is automat-
ically recognized and does not need to be re-installed.
Press the [Continue] button to continue with the installation.
Advertisement
Table of Contents
