Omron ZS-L User Manual page 22

Section 1
ZS-L Applications
●
Installable away from the sensing object
The ZS-L Series can be installed up to 95 mm (ZS-LD80) or up to 250 mm (ZS-LD200)
away from the measuring point. This allows workpieces to be measured at a position
that is not influenced by the workpiece flying up or the interference of peripheral mech-
anisms.
●
Simple Measurement of Glass Thickness and Gap between Glass
Two settings, [THICK] for measuring the thickness of glass and [GAP] for measuring
the gap between glass, are provided as sensing object options. Just selecting these
options allows you to set measurement conditions simply.
Setting the Measurement Object p.3-14
●
Mutual Interference Prevented
Mutual interference between 2 Sensor Heads can be prevented by shifting the laser
beam emission timing.
Setting Prevention of Mutual Interference p.3-16
ZS-L
1-6
User's Manual
The ZS-L Series can be installed at positions
that will not be affects by the rubber belt
being cut or flying back which occurs during
emergency stops.
Glass
Glass
LD ON ZERO ENABLE
H
P
L
LD ON ZERO ENABLE LD ON ZERO ENABLE LD ON ZERO ENABLE
H H H
P P P
L L L