Sensor Head; Attaching The Ferrite Core - Omron ZS-L User Manual

Sensor Head

This section describes how to install and connect the Sensor Head.
Never look into the laser beam. Doing so continuously will result in
visual impairment.
Never look into the laser beam.
Do not disassemble the product. Doing so may cause the laser beam
to leak, resulting in the danger of visual impairment. Do not disas-
semble the product.

Attaching the ferrite core

Attach the ferrite core (provided with the Sensor Head) to both ends of the Sensor Head
cable.
If the ferrite core comes loose from the cable, fasten the ferrite core in place with the
Insure Lock (supplied).
Insure Lock
Ferrite core
Sensor Head
Ferrite core
Section 2
ZS-L
2-11
User's Manual