Installation; Before Installing Finsgateway - Omron WS02-LCTC1-E - V2.60 REV 12-2003 Manual

Installation

2-1

Installation

2-1-1 Before Installing FinsGateway

Step 1: Backing Up the
FinsGateway Settings
1, 2, 3...
Step 2: Removing the
Previous FinsGateway
22
To use CX-Process Monitor, you must install the following software on the same
computer. After installing FinsGateway Embedded Version 3, install CX-Pro-
cess Monitor.
• FinsGateway Embedded Version 3
• CX-Process Monitor
• License Key Driver
Note 1. To use the CX-Process Monitor, you also need the WS02-LCTK1-EL01 Li-
cense Key (sold separately). In addition to installing the CX-Process Moni-
tor, make sure to first connect the WS02-LCTK1-EL01 License Key to the
computer printer port, and then install the License Key Driver before using
the CX-Process Monitor. When using the CX-Process Monitor, make sure
that the WS02-LCTK1-EL01 License Key is always connected to the printer
port.
2. This software must be installed on an computer using Windows NT 4.0 or
Windows 2000 as its OS. It will not operate on Windows 95, 98, or Me.
3. Be sure to install FinsGateway Embedded Version 3 before installing CX-
Process Monitor. You cannot install CX-Process Monitor first.
4. Be aware that you cannot start CX-Process Monitor if FinsGateway Em-
bedded Version 3 is not installed.
5. If connecting CX-Process online using a PLC and Host Link, you cannot
install and use CX-Process on the same computer as FinsGateway Version
1.
If an earlier version of FinsGateway has been installed already, start from Step 1:
Backing Up the FinsGateway Settings.
If FinsGateway is being installed on the computer for the first time, skip to Step 5:
ComCtl32.dll Update.
If necessary, back up the previous FinsGateway settings, as follows:
Note If FinsGateway is removed (uninstalled) without backing up the setting data, the
previous setting data will all be lost.
1. Execute the Backup/Restore FinsGateway Setting Data program on the
CD.
<CD-ROM drive>:\Fgwv3\FgwUtils\SettingSalvage.exe
2. Select the Backup to File option, and click OK.
Remove the previous version of FinsGateway by referring to that manual for de-
tails.
Section 2-1