Screen Configuration; Crt Builder Functions - Omron WS02-LCTC1-E - V2.60 REV 12-2003 Manual

Screen Configuration

4-6

Screen Configuration

4-6-1 CRT Builder Functions

Starting the CRT Builder
This section explains how to perform operations to configure the CX-Process
Monitor Screen.
Use the CRT Builder to configure the following screens.
Overview Screen
• Control Screen
• Trend Screen
• Graphic Screen (You must create this screen beforehand. Refer to 4-4
System Monitor Settings.)
• Annunciator Screen
Alarm Log Screen
Operation Guide Screen
Note The Tuning Screen is created automatically when the Control Screen is regis-
tered.
When all screens have been configured, save their settings.
In the Setup Dialog Box, click the CRT Builder Button.
The CRT Builder Window will be displayed.
Section
Click here.
4-6
99