Omron WS02-LCTC1-E - V2.60 REV 12-2003 Manual page 31

Basic Operating Procedure
20
ing the monitoring process (i.e., start FinsGateway Controller Link and
Ethernet manually).
Perform the following operation.
a) Click the Start Button in the Main Window.
b) Click the Engineer Button in the Mode Selection Dialog Box.
c) Click the Set Up Button in the Mode Selection Dialog Box.
d) Enter password.
e) Click the File Mapping Button in the Setup Dialog Box (mapping to the
Monitor Tag File Screen).
f) Click the Overview Button in the Mode Selection Dialog Box.
g) Select the screens using the Overview Screen, and check that each
function is operating normally.
5. Start the Monitor Operation to monitor the Loop Control Unit (Refer to Sec-
tion 3 Monitor Screen Functions and Operations for details).
Perform the following operation.
a) Click the Start Button in the Main Window.
b) Click the Operator Button in the Mode Selection Dialog Box.
c) Click the screens using the Overview Screen.
Section 1-2