Omron WS02-LCTC1-E - V2.60 REV 12-2003 Manual page 170

FinsGateway Settings when Connected Using Controller Link
Communication Unit Settings
Select the Communication Unit Tab.
Make the following settings in the Network Participation Status Field:
• Select the Map Network Participation Status To Event Memory Button.
• Set Memory Name to DM.
• Set Offset to 16 Words.
Make the following settings in the Data Link Status Field:
• Select the Map Data Link Status To Event Memory Button.
This completes the FinsGateway settings.
Creating and Transferring the Data Link Table
The flowchart outline for creating and transferring the data link table is as follows:
The data link table setting procedure is different when the number of other nodes (i.e., the number of PLCs con-
nected to the network) is one, and when it is two or more. This section shows the data link setting procedure when
the number of other nodes is one, and when the number of other nodes is two.
162
1) Create the local node (computer) data link table.
2) Create the data link table for other nodes (PLC).
3) Start the data link.
Appendix B