Omron WS02-LCTC1-E - V2.60 REV 12-2003 Manual page 27

CX-Process Monitor
Item
Online User Con-
operation figuration
functions screen
Online System
operation Fixed
functions screen
16
Graphic This screen displays changes in the plant status using graphic elements
screen representing plant devices pasted to the screen from the graphic elements
library (provided with the CX-Process Monitor). The maximum number of
screens is 200.
Fixed graphic elements provided in library: Devices, thermometers,
transmitters, orifices, text
Variable graphic elements provided in library:
Analog input: Bar graph display, numeric indication, tanks
Analog output: Numeric setting (by AO Terminal Settings from Computer
block)
Contact input: Pumps, valves, indicators
Contact output: Switches (by DO Terminal Settings from Computer block)
Annunciator This screen notifies the operator of alarms or errors that occur by changing
screen the display color and emitting sound. At the same time, a 32-character
message is displayed over two lines on screen elements.
A total of 16 screen elements (4 columns x 4 lines) can be displayed on each
screen. The maximum number of screens is 5.
Operation This screen displays pre-registered 128-character messages over two lines
Guide together with the date of occurrence when the specified internal switch is set
Message to ON.
screen
Max. number of registerable messages: 100, Number of display colors: 7
Up to 1000 messages are displayed in a single screen.
Output possible in CSV format.
Alarm Log A record of alarms (time of error occurrence, tag name, PV or MV current
screen value at occurrence, alarm type, etc.) that occur and that are input from the
Control and Alarm blocks is saved and displayed as a list later.
Up to 1000 alarm messages are displayed in a single screen.
Output possible in CSV format.
Operation A record of changes (date and time of change, tag name, original ITEM data
Log screen setting, new ITEM data setting, etc.) made to ITEM data on the Loop Control
Unit in the Control or Tuning screen is saved and displayed as a list later.
Up to 1000 operation messages are displayed in a single screen.
Output possible in CSV format.
System This screen displays the Loop Control Unit operation run/stop commands,
Monitor operation start/stop status, execution errors, RAM sum errors, battery errors,
screen and the status of the Controller Link Data Link.
System This screen displays a log of the run/stop history and a history of execution
Monitor Log errors that occur on the Loop Control Unit together with the date of
screen occurrence.
Output possible in CSV format.
Descriptions
Section 1-1