Omron WS02-LCTC1-E - V2.60 REV 12-2003 Manual page 179

FinsGateway Settings when Connected Using Controller Link
6. Proceed to Edit Controller Link Data Link Table (2). Normally, use this screen to set the data link
refresh order, but here click the Next Button to proceed to the next step.
7. Click the Finish Button. The verification dialog box will be displayed. Click the Start Button.
This completes the local node's data link table settings. When you click the Start Button, the data
link will start immediately. Other node settings have not yet been completed, however, so stop the
data link using the Controller Link Properties Screen.
2) Creating Data Link Tables for Other Nodes
Setting Node 1's Data Link Table
1, 2, 3... 1. Select FinsGateway, and then select FinsGateway Settings, and then select Controller Link
Properties.
Appendix B
171