Omron WS02-LCTC1-E - V2.60 REV 12-2003 Manual page 119

Screen Configuration
Registering Annunciator
Screens
1, 2, 3...
110
3. Select Graphic Screen, and then click the New Button.
The following dialog box will be displayed.
Select the Graphic Screen you created and saved using CRT Builder (i.e.,
the Graphic Builder Button).
Note Before registering the Overview Screen, you must create and save
the Graphic Screen using CRT Builder.
4. Select the screen name, and then click the OK Button.
The Overview Screen will be registered, and the name of the screen you en-
tered will be displayed in the Screen Management Tree.
You can register up to five Annunciator Screens. The registration procedure is
as follows:
1. Select the Overview Screen's sub-element Screen in the CRT Builder's
Screen Management Tree.
2. In the Settings Menu, select Register Screen, or double-click Screen.
The dialog box shown in Step 2 of the preceding section, Control Screen
Registration, will be displayed.
3. Select the Trend Screen, and then click the New Button.
The following dialog box will appear.
Section
Select the name of Graphic Screen
to be allocated.
All of the saved Graphic Screen
names will be displayed.
Click to select. Double-click to
omit Step 2 of the operation.
4-6