Tuning Screens - Omron WS02-LCTC1-E - V2.60 REV 12-2003 Manual

Tuning Screens

Click the text to display the dialog boxes for changing the settings. You can
make changes uses the ten-key dialog box (using the mouse), or the
keyboard. (The ten-key pad is displayed when you select the Enter box.
Refer to 4-7 Labels, Alarm Sounds, and Ten-key Settings for
ten-key/keyboard switching settings.)
Set operation or alarm to
1 to stop their operation.
Select these buttons to display the dialog boxes for changing the settings.
Note 1. Same as for Control Screen
2. If using the Tuning Screen, use the 1-Block Send Terminal to Computer
function block (403). Tag names specified using the 4-Block Send Terminal
to Computer function block(404) cannot be displayed on the Tuning Screen.
Click the Time Range Button to set the maximum amplitude for the time axis
displayed on the screen.
The scale can be set to either percentages or engineering units. The setting can
be made by clicking the System Info. Button when configuring the screen and
then setting the Auto-start–Divisions in Tuning screen setting.
To zoom in on the scale displayed, click the Scale Button and change the setting.
To add bias to the display, click the Bias Button and change the setting.
Collection of Trend data for the Tuning Screen starts once you have moved to
the Tuning Screen, and is displayed only while the Tuning Screen is displayed.
To continue to collect trend data even if you then move from the Tuning Screen to
another screen, and to display the data continuously if you return to the Tuning
Screen, click the Continuous Button. In this way, the data from three screens is
collected against the background of the Tuning Screen.
To cancel the Continuous function explained above, click the Cancel button.
Section
Refer to 3-6 Control Screen
for how to operate.
3-7
53