Operation Guide Message Screens - Omron WS02-LCTC1-E - V2.60 REV 12-2003 Manual

Operation Guide Message Screens

Function block name (format)
Target function
1-Block Send Terminal to Computer
block
(403)
4-Block Send Terminal to Computer
(404)
DO to Computer (401), DO Terminal
to all nodes (407)
DO Terminal Settings from
Computer (409)
Display
Setting

3-11 Operation Guide Message Screens

If an alarm/error occurs, the icon color will change and a beep will sound. At the
same time, two rows of eight wide-size characters making a user-registered
message can be displayed.
You can display a total of 16 separate elements per screen as 4 rows x 4 col-
umns, to a maximum of five screens.
Control Block: Contacts within Tag ITEMs for Basic PID (011),
Advanced PID (012), Batch flowrate capture (014), Indication
and Setting (031), Indication and Operation (032), Ratio
Setting (033), Indicator (034), blended PID (013), 2-position
ON/OFF (001), and 3-position ON/OFF (002).
Control Block: PV, SP, and MV only for Basic PID (011),
Advanced PID (012), Indication and Setting (031), Indication
and Operation (032), Ratio Setting (033), Indicator (034),
2-position ON/OFF (001), and 3-position ON/OFF (002).
Operation Block: High/Low Alarm (111), Segment Program
2(157), ON/OFF Valve Manipulator (221), Motor Manipulator
(222), Reversible Motor Manipulator (223), Motor Opening
Manipulator (224), Timer (205), Counter (208)
Contact input signals or contact output signals for all Function
Blocks, or contact value parameters
Contact output ITEM for DO Terminal Settings from Computer
(Network resend only.)
Color, sound, and messages displayed when contact is ON.
None
Operation Guide Message Screens display messages registered when the con-
tact signal was turned ON. To display the Operation Guide Message Screen,
click the Operation Guide Button.
When the specified contact (internal switch, etc.) is turned ON, the pre-prepared
wide-size character message (32 characters x 2 lines) will be displayed together
with the time the contact was turned ON. (When the contact is turned ON, a red
mark will be displayed next to the Operation Guide icon on the Overview
Screen.)
Possible No. of registrations: 100 messages max.
Send source Function Block, or ITEM
Section 3-11
65