Annunciator Screens - Omron WS02-LCTC1-E - V2.60 REV 12-2003 Manual

Annunciator Screens

Element Function block name (model)
Function block 1-Block Send Terminal to
Computer (403)
4-Block Send Terminal to
Computer (404)
AO to Computer (402), AO
Terminal to all nodes (408)
DO to Computer (401), DO
Terminal to all nodes (407)
AO Terminal Settings from
Computer (410)
DO Terminal Settings from
Computer (409)
Display
Setting

3-10 Annunciator Screens

64
Control Block: Tag ITEMs for Basic PID (011), Advanced PID
(012), Batch flowrate capture (014), Indication and Setting (031),
Indication and Operation (032), Ratio Setting (033), Indicator
(034), blended PID (013), 2-position ON/OFF (001), 3-position
ON/OFF (002)
Control Block: Basic PID (011), Advanced PID (012), Indication
and Setting (031), Indication and Operation (032), Ratio Setting
(033), Indicator (034), 2-position ON/OFF (001), 3-position
ON/OFF (002)
Operation Block: High/Low Alarm (111), Segment Program 2
(157), ON/OFF Value Manipulator (221), Motor Manipulator
(222), Reversible Motor Manipulator (223), Motor Opening
Manipulator (224), Timer (205), Counter (208)
Analog input signals or analog output signals for all Function
Blocks, or analog value parameters
Contact input signals or contact output signals for all Function
Blocks, or contact value parameters
Analog output ITEM for AO Terminal Settings from Computer
(Used to set ordinary analog values. Displays using network
resend monitoring.)
Contact output ITEM for DO Terminal Settings from Computer
(Used to set ordinary contact values. Displays using network
resend monitoring.)
Analog values: Bar graphs, numerical values, tank level
Contacts: Indicators, pumps, valves, pipes
Analog values: Numerical values (using AO Terminal Settings
from Computer)
Contacts: Switches (using DO Terminal Settings from Computer)
Annunciator Screens display comprehensively the contacts status (mainly the
alarm status). To display the Annunciator Screen, click the Annunciator
Screen icon on the Overview Screen.
There are no particular limits to contacts that can be specified. Basically, howev-
er, register contacts that display the alarm status of the Control Block's HH
(High/High Alarm), H (High Alarm), L (Low Alarm), and LL (Low/Low Alarm), etc.
Function block or ITEM set as send source
Switch screens using this button.
If an error occurs, the Error Display Panel
and Screen Switching Button will both flash.
Section 3-10