Screen Configuration; Quitting The Zen Support Software - Omron ZEN-SOFT01-V4 - 12-2008 Operation Manual

Screen Configuration

1-3-2

Quitting the ZEN Support Software

1-4

Screen Configuration

6
3. The Property Settings Screen will be displayed. Enter the ZEN
model and configuration (i.e., whether or not Expansion I/O Units
are connected), the project name, and a comment and press the
OK Button.
4. The ZEN Support Software will start.
Select File(F)/Exit(E) from the Menu Bar to close the ZEN Support
Software.
The ZEN Support Software allows the display to be set to either a
Ladder Diagram Display or an Electric Circuit Display. The
functionality of the ZEN Support Software is the same regardless of
which display is used.
Section 1-4
Up to 31 characters
can be entered.