Mounting The Terminal Cover; Removing The Digital Operator; Mounting The Digital Operator - Omron VARISPEED V7 User Manual

• Inverters of 5.5 and 7.5 kW:
Use a screwdriver to loosen
the screw (section B) on the
terminal cover surface. (To
prevent loss, this screw cannot
be removed.) Then press the
right and left sides in direction
1 and lift the terminal cover in
direction 2.
Mounting the Terminal
Cover
Mount the terminal cover by
reversing the order of the above proce-
dure for removal.

Removing the Digital Operator

After removing the front cover, (fol-
low the procedure on page 25) lift the
upper and lower sides (section C) of
the right side of the Digital Operator
in direction 1.

Mounting the Digital Operator

Mount the Digital Operator by revers-
ing the order of the above procedure
for removal.
26
B
1
2
1
C
C