Example: Writing Constants from EEPROM in Operator to Inverter
Explanation
• Enable the set-
tings for con-
stants n001 to
n179.
• Execute write-
in (COPY)
using the Con-
stant Copy
Function
Selection
(n176).
A setting range check and matching check for the written constants are
executed after the constants are written from the Digital Operator to the
Inverter. If a constant error is found, the written constants are discarded
and the constants stored before writing are restored.
When a setting range error is found, the constant number where an error
occurs is indicated by flashing.
When an inconsistency in the settings is found,
is indicated by flashing.
• Press
and
DSPL
PRGM
will light.
• Press
to dis-
ENTER
play the set value.
• Change the set value to 4
by pressing the
key.
• Press
.
ENTER
• Change the constant No.
to n176 by pressing the
or
key.
• Press
to dis-
ENTER
play the set value.
• Change the set value to
CPy by pressing the
key.
• Press
.
ENTER
• Press
or
DSPL
.
ENTER
6 Programming Features
Operator Display
(May be a different constant number)
(Lit)
(May be a different set value.)
(Flashes)
or
(Lit for one second.)
↓
(The constant number is displayed.)
(Lit)
(Lit)
or
(Flashes while executing the
copy.)
↓
(End is displayed after the
copy has been completed.)
(The constant number is displayed.)
( : a number)
173