Omron VARISPEED V7 User Manual page 170

Constant Name
No.
n176 Constant
Copy Func-
tion Selection
Prohibiting Constant Read Selection (n177)
Select this function to prevent accidentally overwriting the constants
stored in EEPROM in the Digital Operator. Reading is not possible
when this constant is set to 0.
The constant data stored in the Digital Operator are safe from accidental
overwriting.
If reading is attempted while this constant is set to 0, PrE will flash.
Press
DSPL
Constant
No.
n177 Constant Read
Selection Prohibit
Unit
- rdy: Ready
rEd: Read
CPy: Copy
vFy: Verify
vA: Inverter capacity display
Sno: Software No. display
or and return to the constant number display.
ENTER
Name Unit
6 Programming Features
Setting Range
Setting Range
- 0: Read prohibited
1: Read allowed
Factory
Setting
rdy
Factory
Setting
0
169