Inverter Specifications - Omron VARISPEED G7 Instruction Manual

Inverter Model Numbers
The model number of the Inverter on the nameplate indicates the specification, voltage class, and maximum
motor capacity of the Inverter in alphanumeric codes.

Inverter Specifications

The Inverter specifications ("SPEC") on the nameplate indicate the voltage class, maximum motor capacity,
the protective structure, and the revision of the Inverter in alphanumeric codes.
TERMS
-4
1
CIMR - G7 C 2 0P4
Inverter
Varispeed G7
No. Specification
C European standard
No. Voltage Class
AC input, 3-phase, 200 V
2
4 AC input, 3-phase, 400 V
Fig 1.2 Inverter Model Numbers
No. Voltage Class
2 AC input, 3-phase, 200 V
4 AC input, 3-phase, 400 V
No. Max. Motor Capacity
0P4 0.4 kW
0P7 0.75 kW
to
to
*
300
300 kW
"P" indicates the decimal point.
Fig 1.3 Inverter Specifications
Open Chassis Type (IEC IP00)
Protected so that parts of the human body cannot reach electrically charged parts from the front when the
Inverter is mounted in a control panel.
Enclosed Wall-mounted Type (IEC IP20, NEMA 1 Type 1)
The Inverter is structured so that the Inverter is shielded from the exterior, and can thus be mounted to the
interior wall of a standard building (not necessarily enclosed in a control panel). The protective structure con-
forms to the standards of NEMA 1 in the USA.
Top protective cover must be installed to conform with IEC IP20 and NEMA 1 Type 1 requirements. Refer to
Fig. 1.4 for details.
No. Max. Motor Capacity
0P4
0P7 0.75 kW
to
300
"P" indicates the decimal point.
2 0P4 1
No. Protective Structure
0 Open chassis (IEC IP00)
Enclosed wall-mounted (IEC IP20,
1
NEMA 1 Type 1)
0.4 kW
to
*
300 kW