Omron E5EK PROGRAMMABLE TYPE User Manual page 99

Standby time monitor
• Displays the remaining standby time. (This time is not displayed when the con-
troller is reset.)
Function
Monitor
F Related description
4.7 Setting Running Conditions (page 4-19)
F Related parameter
See
"Standby time" (level 2 mode)
Pattern elapsing time
• Displays the time that has elapsed since the start of the pattern. When a pattern is
repeatedly executed or all patterns are executed, the time counting restarts at the
top of each pattern.
Function
When the time exceeds "99.59", "99.59" blinks on the display.
Monitor
Pattern execution count monitor
• Displays the number of times that the current pattern has been executed. "0" is
displayed when the controller is reset or when the controller is in a standby state.
Function
Monitor
F Related parameter
"Pattern execution count" (program mode)
See
Monitor Range
0.00 to 99.59
Monitor Range
0.00 to 99.59
Monitor Range
0 to pattern execution count
Level 0 Mode
Conditions of Use
The controller must be in a standby
state.
Unit
Hour, minute
Unit
Program time unit
Unit
Times
5--9