Dimensions (Unit: Mm) - Omron C200HW Operation Manual

Specifications
Output Specifications
CW/CCW Pulse Output
Specifications
Pulse
f frequency
7 mA/5 VDC±5%
A
9.7 µs min.
50 Kpps
4.7 µs min.
100 Kpps
2.3 µs min.
200 Kpps
0.76 µs
500 Kpps
min.

2-1-4 Dimensions (Unit: mm)

20
Item
Maximum switching
capacity
Minimum switching
capacity
Leakage current
Residual voltage
External power supply
The minimum CW/CCW pulse widths are shown below.
The OFF and ON refer to the output transistor.
The output transistor is ON at level "L."
OFF
ON
Open or close current / Loaded power-source voltage
30 mA/5 VDC±5%
B A
9.7 µs min. 9.8 µs min.
4.7 µs min. 4.8 µs min.
2.3 µs min. 2.3 µs min.
0.82 µs 0.77 µs
min. min.
Note 1. The load in the above table is the net resistance load, and the connecting
cable impedance with the load is not considered.
2. Due to distortions in pulse waveforms as a result of connecting cable imped-
ance, pulse widths during actual usage may be smaller than those shown in
the above table.
30 mA at 4.75 to 26.4 VDC (NPN open collector)
(16 mA: Terminals with 1.6-kΩ limit resistance)
7 mA at 4.75 to 26.4 VDC (NPN open collector)
0.1 mA max.
0.6 V max.
24 VDC ±10% NC413: 90 mA max.
A
7 mA/24 VDC±10%
(1.6-kΩ resistance)
B A
9.8 µs min. 9.7 µs min.
4.8 µs min. 4.7 µs min.
2.3 µs min. 2.2 µs min.
0.88 µs 0.74 µs
min. min.
Mounted Dimensions
Cable
Approx. 230
Section
Specification
NC213: 50 mA max.
NC113: 30 mA max.
B
90%
10%
16 mA/24 VDC±10%
(1.6-kΩ resistance)
B A
9.7 µs min. 9.7 µs min.
4.7 µs min. 4.8 µs min.
2.2 µs min. 2.3 µs min.
0.72 µs 0.76 µs
min. min.
2-1
B
9.7 µs min.
4.8 µs min.
2.3 µs min.
0.85 µs
min.
Backplane