Verifying The Network Configuration; Verifying Device Parameters - Omron 3G8F5-DRM21-E - V2 Operation Manual

Uploading and Verifying Device Parameters
5-3-3

Verifying the Network Configuration

1, 2, 3...
5-3-4

Verifying Device Parameters

Using the Network
Configuration Window
1, 2, 3...
Note The uploaded parameters will be discarded if the No Button is clicked to quit
the Edit Device Parameters Window after the parameters have been
uploaded.
Use the following procedure to compare the actual network configuration with
the network configuration created on the Configurator.
1. Place the Configurator online
2. Select Network and Compare.
The progress window will be displayed and the comparison will begin.
3. If there are any comparison errors, the following window with the details of
the errors will be displayed.
Note This function compares only the network configurations. It does not compare
the parameters of each device.
The following two methods can be used to compare the parameters of net-
work devices for verification with corresponding parameters in the Configura-
tor.
• Comparing the parameters of devices selected from the Network Configu-
ration Window
• Comparing the parameters through the Edit Device Parameters Window
Device - Parameter - Compare
To compare the parameters through the Network Configuration Window, use
the following procedure.
1. Place the Configurator online.
2. Select the device.
3. Select Device, Parameter, and Compare.
Section 5-3
115