Omron 3G8F5-DRM21-E - V2 Operation Manual page 116

Creating and Editing I/O Comments
The following window will be displayed.
An I/O comment can be created for each connection supported by the de-
vice. If areas have been already allocated to the master, they will be dis-
played.
Note a) If an area is not allocated to a master, the display will show 0000,
the default area.
b) Edited I/O comments can be exported in the CSV format by se-
lecting Export and I/O Comment List. Refer to 6-5 Exporting Data
Created in Configurator. Part of I/O comment data exported in the
CSV format can be opened in spreadsheet software and used for
CX-Programmer variable tables.
3. Select the bit where the I/O comment should be set and press the Enter
Key (or click the bit position).
Data can be input into the comment area as shown below.
4. Input the comment and press the Enter Key.
Section 4-10
97