Comparison With Previous Versions Of The Configurator - Omron 3G8F5-DRM21-E - V2 Operation Manual

Devicenet configurator ver. 2; isa board; pcmcia card

Table of Contents

Introduction

1-1-8

Comparison with Previous Versions of the Configurator

Item

Basic configuration/operations

Network connection

Supported

OMRON masters

DeviceNet

masters

Slave remote I/O allocations

Master remote I/O

communications settings

Slave remote I/O

communications settings

Enabling or disabling device

data checks in remote I/O

communication

Explicit message monitoring

timer list settings

COS/Cyclic heart beat timer

settings

I/O comment settings (for

slave I/O data)

Monitor

Display of list of data on net-

functions

work devices

Unit status monitoring

Slave function monitoring

Storage

Network configuration files

functions

Device parameter files

EDS files

Compact flash memory

The following table lists the difference in function between version 1.20 and

version 2.@ of the Configurator.

Version 2.@

Dragging and dropping offline make

it possible to create a virtual network

(for display) in the Configurator.

Each device (Master or slave) can

also be set online.

• Dedicated ISA Board

• Dedicated PCMCIA Card

• From the COM port of the computer

to the serial port of the PLC. (Pos-

sible with CS/CJ-series PLCs only.)

• From the Ethernet port of the com-

puter to the Ethernet Unit of the

PLC. (Possible with CS/CJ-series

PLCs only.)

CS1W-DRM21, CJ1W-DRM21,

CVM1-DRM21-V1 or C200HW-

DRM21-V1

Note Output is possible in file for-

mats compatible with open

network controllers or NX-

Servers for DeviceNet.