Changing The First Address Of Output/Input Block - Omron 3G8F5-DRM21-E - V2 Operation Manual

Manual I/O Allocations
4-8-2

Changing the First Address of Output/Input Block

Device - Parameter - Edit - I/O Allocation Tab - Setup Button
1,2,3...
86
Example:
3300:Bit00: Starts with bit 00 (LSB) of word 3300.
3300:Bit08: Starts with bit 08 (MSB) of word 3300.
Word address (Example 3300)
First bit address (Bit00)
No words in the CPU Unit will be displayed for any memory block that is
not in use.
To change the output/input block allocation areas in the I/O memory of the
CPU Unit, use the following procedure.
1. Click the Setup Button of the block to be changed.
2. The following window will be displayed.
3. Set the area, start word, and the number of words for the block.
The number of words to be displayed in a block by the Configurator is set
in the Words field. For the CS1W-DRM21 or CJ1W-DRM21, the maximum
number of words that can be allocated to one block is 500. For the
C200HW-DRM21-V1 and CVM1-DRM21-V1, the maximum number of
words that can be allocated to one block is 100.
The ranges that can be set are shown below.
• CS1W-DRM21 or CJ1W-DRM21
PLC model
CS Series or
CJ Series
Banks 0 to 12 of the EM area can be used.
Example: Allocation starts with
bit 00 (LSB) of word 3300.
Product name of slave
Allocated the bytes beginning with bit 08
of word 3300. Therefore, the product
name for 3300:Bit08 is left blank.
Data area
CIO Area
DM Area
Work Area
HR Area
EM Area
Section 4-8
Range
0000 to 6143
DM 0000 to DM 8191
WR 000 to WR 511
HR 000 to HR 511
EM 00000 to EM 32767