Slave Information - Omron 3G8F5-DRM21-E - V2 Operation Manual

Manual I/O Allocations
Automatic Allocation
4-8-4

Slave Information

I/O Allocation Tab - Information Button
1,2,3...
90
I/O Allocation Tab - Register/Unregistered (Allocate/Unallocated) Button
Note This procedure is the same for the CS1W-DRM21,
CJ1W-DRM21, CVM1-DRM21-V1, and C200HW-DRM21-V1.
• To allocate in units of words the selected slaves to an unoccupied area in
the order of earlier addresses, click the Auto Button.
• To unregister the allocations of the selected slaves, click the Delete But-
ton. The advanced setup function (to be explained later) is not possible
while automatic allocation is specified.
Device information on registered slaves, such as I/O comments, can be
checked with the I/O Allocation Tab Page. The I/O comment is set to the I/O
data of a slave by selecting Edit I/O Comment from the Device Menu.
To display information on the slave, use the following procedure.
1. Select the device.
2. Click the Information Button.
The following window will be displayed.
When the registered device is selected in the above window, the slave in-
formation will be refreshed to information on the selected device.
Section 4-8