Omron 3G8F5-DRM21-E - V2 Operation Manual page 104

Manual I/O Allocations
Block 1 allocations
Item
Registered Device List
Auto Button
Delete Button
Edit Button
Information Button
Memory Blocks
Ch
Product Name
Setup Button
Allocation Status of
Blocks 1 and 2
2. Click the I/O Allocation (OUT) or I/O Allocation (IN) Tab. The following
window will be displayed.
Block 2 allocations
Only devices with valid output or input data among all devices registered with the General Tab
will be displayed.
Allocates in units of words the slaves selected from the Registered Device List to an
unoccupied area in the order of earlier addresses.
Unregisters the I/O allocations of the selected slaves in the Registered Device List.
Allows manual allocation through the Edit Window.
Displays slave information items (i.e., the allocation area and I/O comment data).
Displays the allocation status of each slave (product name) of block 1 and block 2.
Bit address where allocation starts. The first bit address will be displayed after the word
address.
Block 1 and block 2
Sets the first address and first address size (i.e., the number of words) of block 1 or block 2.
The block allocation status list displays the words of the CPU Unit and the
product names of devices allocated in the respective areas of the CPU Unit.
The start bit and the word address for each device are indicated in the Ch col-
umn.
Registered Device List
Automatically allocates I/O to selected slave.
Deletes I/O allocation to selected slave.
Display window to manually edit allocations.
Displays slave information.
Bytes: Word address and first bit address
Product names of allocated slaves
Memory block
Updates block 1.
Updates block 2.
Description
Section 4-8
85