Omron 3G8F5-DRM21-E - V2 Operation Manual page 85

Setting Slave Parameters
Numerical Input within Certain Range
Selection from Limited Items
ON/OFF Settings
66
If a push-pin icon is displayed next to a parameter name, it is a read-only
parameter and cannot be edited.
The set value will be changed as shown below according to the parameter
input type.
Set the value between the maximum and minimum values.
Select the set value from the set value list.
Select the item and turn it ON or OFF.
5. Press the Enter Key to input the set value.
Press the ESC Key to cancel the change.
6. Click the OK Button when all the items have been edited.
Section 4-2