Error Messages - Omron 3G8F5-DRM21-E - V2 Operation Manual

The following table lists the error messages that might be displayed during operation.
Error message
"Printing can not be started."
"Instance not specified."
"Interface can not be opened."
"Interface can not be go on-line."
"Specified Interface can not be gone to
On–line."
"Interface can not be closed."
"Object can not be created."
"Can not execute due to on-line."
"Wrong Start Words."
"2 bytes or more can not be allocated to odd
address."
"Class not specified."
"Connection type not specified."
"Wrong Connection Path."
"Connection can not be opened."
"Connection can not be closed."
"Not support operation."
"Invalid File Type."
"This device can not register."
"Sending command failed."
"No more character strings specified found." No more corresponding character strings exist.
"Not able to add any more device to the list." No more devices can be added.
"Server can not be started."
"Exceeds the number of connection s
permitted."
"Part or all of specified area Allocated to
other device."
"Part or all of specified area Allocated to
other block."
"All or part of assigned area are conflicting
with I/O data already allocated for other
device.\nOr, it will exceed the permitted
channel size."
"Specified file can not use this Device."
"Specified unit can not be accessed."
"Specified unit not CS1W-DRM21."
Appendix A

Error Messages

The printing process could not be started. Check the printer and start
printing again.
The specified instance data is incorrect. Set correct data.
The specified interface could not be opened. If the interface is being used
by another application, the user should quit the application and open the
interface again.
The interface could not be placed online.
The interface could not be placed online. Check the settings and set the
interface to online again.
The interface could not be closed.
The internal object could not be created.
Operate offline.
The start word is incorrect. Set the start word within the permissible range.
Two bytes or more cannot be allocated to odd addresses. Set to even
addresses.
The specified class data is set incorrectly. Set the data correctly.
Valid connections are not set. Set the connections correctly.
The connection path length is incorrect. Set the connection path length cor-
rectly.
The connection could not be opened.
The connection could not be closed.
The operation is not supported by the specified device.
The specified file cannot be accessed. Set the correct file.
This device cannot be registered.
The command could not be transmitted. Transmit the command again.
The server function could not be started.
The number of connections cannot be supported. Limit the maximum num-
ber of connections to two.
Part or all of the specified area has already been allocated to another
device. Either allocate a different area or change the other device's I/O
allocation.
All or part of the specified memory block area is already allocated to
another memory block area. Either specify a different area or change the
settings of the other memory block area.
All or part of the specified area is allocated to another I/O area or in excess
of the permissible number of words. Either specify a different area or
change the settings of the other I/O area.
The specified parameter file was created for a different model. Set the
correct file.
The specified CPU Bus Unit could not be accessed. Check the unit number
and access the specified CPU Bus Unit again.
The specified CPU Bus Unit is not the CS1W-DRM21. Set the unit number
for the CS1W-DRM21.
Meaning
143