Omron 3G8F5-DRM21-E - V2 Operation Manual page 84

Setting Slave Parameters
1,2,3...
Note Slaves must be added to the Network Configuration Window to edit the
parameters. Creating the network configuration will be explained later in this
section.
To edit the parameters, use the following procedure.
1. Select the device.
2. Select Device, Parameter, and Edit.
3. The following warning will be displayed if there are no editable parameters
existing.
Slaves for which this message is displayed do not require parameter set-
ting.
The following window will be displayed if editable parameters exist.
Download parameters
Upload parameter
Reset parameters to default settings
4. Select the parameter and press the Enter Key or double-click the param-
eter.
Usable only when online.
Compare parameters
Usable only when online.
Usable only when online.
Usable only when online.
Section 4-2
Parameter group selection
Parameter names
Parameter set values
Parameter help
Device reset
Usable only when
online.
65