Downloading The Network Configuration/Device Parameters To Devices; Going Offline - Omron 3G8F5-DRM21-E - V2 Operation Manual

Downloading the Network Configuration/Device Parameters to Devices

SYSMAC CS/CJ Ethernet
Unit IF Port
5-1-3

Going Offline

Network - Disconnect
5-2 Downloading the Network Configuration/Device
Parameters to Devices
108
Refer to the SYSMAC CS/CJ-series Operation Manual for each setting
item.
(Continued from step 1 above.)
2. If SYSMAC CS/CJ Ethernet Unit IF Port is specified as the interface, the
Setup Interface Dialog Box will be displayed.
Refer to Selecting SYSMAC CS/CJ Ethernet Unit IF in 3-3-2 Designating
the Interface for each setting item.
3. Click the OK Button.
A confirmation window will be displayed. Click the OK Button.
The DeviceNet network will be connected.
When the network is connected normally online, the color of the status in-
dicator on the Status Bar will change to blue and Online will be displayed.
Use the following procedure to set the Configurator to offline.
Select Network and Disconnect.
The DeviceNet network will be disconnected.
This section explains how to write the master and slave parameters that were
created on the Configurator to the actual network devices. This process is
called "downloading."
The following two methods are used to write parameters to network devices.
• Downloading the network configuration
• Downloading parameters for specific devices
Section 5-2