Sensor Holder (Id) (For Rec) Removal/Installation - Sony SRW-1 Maintenance Manual

5-5-22. Sensor Holder (ID) (for REC) Removal/Installation

Outlines
Replacement
Removing cassette compartment assembly
Removing sensor holder (ID) (for REC)
Installing sensor holder (ID) (for REC)
Operation check
Installing cassette compartment assembly
Preparations
1. Turn off the power.
2. Remove the outside lid assembly and the outside panel assembly.
(Refer to Section 1-6.)
Removal
1. Removing cassette compartment
assembly
Remove the sensor holder (ID) (for REC) upward
while pressing the two claws with tweezers.
5-128 (E)
Sensor holder (ID) (for REC)
Claw
S reel table
Claw
SRW-1