3-2. Diagnosis Menu
When the diagnosis menu is started up, the menu below is
displayed.
3-2-1. SOFT VERSION Menu
The SOFT VERSION menu shows the version of software
installed in SRW-1, as well as the version of onboard
FPGAs.
To display SOFTWARE version
1. Select "SOFT VERSION" on the Diagnosis menu, and
press the [ENTER] dial.
The Soft Version screen appears.
n
The software version displayed by the Diagnosis menu is
different from the software version displayed by SOFT
VERSION in the SYSTEM Setup menu, that is, FPGA
version is also displayed following a hyphen.
3-8 (E)
3-2-2. ERROR LOG Menu
The ERROR LOG menu serves to detect errors occurred in
SRW-1/SRPC-1 and to show the saved error/warning
message lists, SRW-1/SRPC-1 command lists, and channel
condition log.
This menu also serves to select display/non-display of
warning messages, and to delete or clear saved error/
warning messages.
1. Select "ERROR LOG" on the Diagnosis menu, and
press the [ENTER] dial.
The ERROR Log window appears.
SRW-1