Table of Contents
Advertisement
1-1. Installation Procedure
The installation procedure of the PFV-D10 is shown in the
following flowchart.
Refer to the each item in this manual for details.
Start
Determining the Location of Installation
1-2. Operating Environment
1-3. Power Supply
1-4. Installation Space
Installing the Optional Board
1-5. Installing Optional Board
Rack Mounting
1-6. Rack Mounting
Connection
End
1-2. Operating Environment
+5 dC to +40 dC
Operating temperature
Performance temperature +5 dC to +40 dC
Humidity
10 to 90 % (No condensation)
Mass
Approx. 6 kg
(Not including the optional board.)
To prevent overheating of the PFV-D10 ensure that there is
good air circulation around the unit.
PFV-D10
Section 1
Installation
1-3. Power Supply
1-3-1. Power Supply Specifications
Power voltage
Power frequency
Power consumption
Rush current
1-3-2. Recommended Power Cord
For customers in the U.S.A. and Canada
Required Part
1 Power cord, 125 V 10 A (2.4 m) : 1-557-377-11
For customers in the United Kingdom
Required Part
2 Power cord, 250 V 10 A (2.5 m) : 1-590-910-11
n
For the customers outside of the area as shown above,
please consult with local Sony's sales representative or
service center.
w
. Use the specified power cord only.
Be sure to use the recommended power cord to avoid fire
and/or an electric shock.
. Ground the unit for your safety.
Be sure to attach a ground wire to avoid an electric
shock.
AC 100 V to 240 V
50/60 Hz
AC 100 to 120 V : Max. 0.8 A
AC 220 to 240 V : Max. 0.4 A
(With the optional board installed.)
AC 120 V IN : 28.8 A
AC 240 V IN : 61.6 A
(Main unit)
1
(Main unit)
2
AC Inlet
AC Inlet
1-1(E)
Advertisement
Table of Contents
