5-5-25. Mechanical Deck Assembly Removal/Installation
Outlines
Removal/Installation
Removing mechanical deck assembly
Installing mechanical deck assembly
Adjustment after installation
Tape path adjustment
Preparations
1. Turn off the power.
2. Remove the handle assembly. (Refer to Section 1-6.)
3. Remove the outside lid assembly and the outside panel assembly.
(Refer to Section 1-6.)
4. Remove the inside panel assembly. (Refer to Section 1-6.)
5. Open the APR-65 board. (Refer to Section 5-1-1.)
6. Remove the DIF-142 board. (Refer to Section 5-1-2.)
7. Remove the DPR-232 board. (Refer to Section 5-1-3.)
8. Remove the EQ-99 board. (Refer to Section 5-1-4.)
n
You can remove/install the mechanical deck assembly without removing the cassette
compartment assembly.
Tools
. Hexagonal bit (1.5 m across):
. Torque screwdriver (for 3 kg):
5-146 (E)
J-6326-120-A
J-6325-400-A
SRW-1