Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for Sony SVR-HDT1000
Summary of Contents for Sony SVR-HDT1000
- Page 1 4-265-096-22(1) Hard Disk Hookups and Settings Recorder Watching TV Programmes Recording Operating Instructions Playback Erasing and Labelling Copying to an External HDD Device Settings and Adjustments Additional Information © 2011 Sony Corporation SVR-HDT1000...
-
Page 2: Warning
• To prevent fire or shock hazard, The manufacturer of this recording durations and quick do not place objects filled with product is Sony Corporation, access to the written data. liquids, such as vases, on the 1-7-1 Konan Minato-ku However, it can easily be apparatus. - Page 3 • Do not disassemble or recordings and all recording stopped). reverse-engineer. Sony is not liable and will not • Do not confine the AC If the hard disk drive should compensate for any lost adaptor in a closed place such...
- Page 4 About this manual • Instructions in this manual describe the controls on the remote. You can also use the controls on the recorder if they have the same or similar names as those on the remote. • The on-screen display illustrations used in this manual may not match the graphics displayed on your...
-
Page 5: Table Of Contents
Table of Contents WARNING ..........2 Precautions . - Page 6 Copying to an External HDD Device Before Copying the Recorded Titles ......30 Connecting an external HDD device .
-
Page 7: Guide To Parts And Controls
Guide to Parts and Controls For more information, see the pages in parentheses. Front panel A [/1 (on/standby) E RESET Turns the recorder on or off. When the recorder does not operate properly, press and hold the RESET B REC1/REC2 indicators button for more than 3 seconds. -
Page 8: Number Buttons
Remote (PIP) (15) Displays the sub-screen. F AUDIO Selects an audio language. SUBTITLE Selects a subtitle language. / (search) (17) Searches for an EPG programme. TV/RADIO Switches between TV and radio channels. G Colour buttons (red/green/ yellow/blue) Shortcut keys for variable functions. H SYSTEM MENU (32) Displays the System Menu. - Page 9 O REPEAT (24) Repeats a title/file. P z REC Starts recording a title. x REC STOP Stops recording a title. Q TV [/1 (on/standby) (43) TV t (input select) (43) TV PROG (programme) +/– (43) (volume) +/– (43) TV % (muting) (43)
-
Page 10: Hookups And Settings
Hookups and Settings Step 1: Connecting the Aerial Cable Connect the aerial cable by following the steps below. Do not connect the mains lead until you have made all the connections. To watch TV in standby mode, set “Standby Mode” to “Mode 2” in “Step 3: Easy Setup” (page 13) or use a splitter (not supplied) to divide aerial input signals between the TV and the recorder. -
Page 11: Step 2: Connecting The Tv And Audio Component
HDMI cable (supplied) To connect a TV through an audio component Audio component Hard disk recorder HDMI cable HDMI cable (supplied) (not supplied) When connecting a Sony TV/audio component that is compatible with the “Control for HDMI” function, see page 16. ,continued... -
Page 12: Connecting Other Cables
When connecting to the HDMI jack Connecting other cables Follow the steps below. Improper handling may damage the HDMI jack and the connector. Carefully align the HDMI jack on the rear of the recorder and the HDMI connector by checking their shapes. Make sure the connector is not upside down or tilted. -
Page 13: Step 3: Easy Setup
Follow the on-screen instructions to Step 3: Easy Setup make each setting, and press proceed. TV Type Be careful not to disconnect the cables or • If you have a widescreen TV, select exit the “Easy Setup” function during this “16:9 Widescreen.”... -
Page 14: Watching Tv Programmes
To display the programme information Press INFO. Watching TV Programmes The display differs depending on the programme. Press INFO again to display the Watching TV detailed information. To exit the programme information, press RETURN. PROG +/– INFO A Programme name B Station name Turn on the recorder and your TV. -
Page 15: Viewing Two Pictures Simultaneously - Pip (Picture-In-Picture)
To set the Favourite List Viewing two pictures You can quickly display the channel to simultaneously – PIP (Picture- watch if you stored your favourite channels. in-Picture) Press SYSTEM MENU and select “Channel.” You can watch two services simultaneously Select “Edit Favourite List” in “Edit on one screen by pressing (PIP) while Channel.”... -
Page 16: About The "Control For Hdmi" Functions For Bravia Sync (For Hdmi Connections Only)
BRAVIA Sync (for While Watching TV HDMI connections only) (Time Shift Mode) By connecting Sony components that are compatible with the “Control for HDMI” You can pause a current TV broadcast, then function with a supplied HDMI cable,... -
Page 17: Recording
C Indicates the current time and date. D Time slot Recording E Indicates if “Programme Recording” Using the EPG is associated with the programme (page 18). (Electronic Programme F Icons that indicate types of the Guide) Display programme : Shows the parental level of the programme (page 34). -
Page 18: Recording A Tv Programme Using The Epg
Recording a TV • If you press REC in step 2, “Programme Recording” can be set. Programme Using the • This recorder automatically adjusts the start/end recording time for the programme set for “Programme Recording” even if the start/end time of the programme has changed. You can easily make a timer recording by selecting a programme on the EPG display When you stop the recording during recording the... -
Page 19: Setting The Timer Manually (Manual)
Setting the Timer Checking/Changing/ Manually (Manual) Cancelling Timer Settings (Timer list) Set the date, time, and programme position of the programme manually. Checking/changing timer Press TIMER. settings The “Timer list” display appears. • The timer settings for the same daily or weekly programmes cannot be changed. -
Page 20: Cancelling Timer Settings
Adjust the selected item using </M/ Recording a TV m/,, and press To enter a character, see “Labelling a Programme While Folder/Title/File (Rename)” (page 28)). Watching Select “OK,” and press This section introduces the basic operation Cancelling timer settings to record a current TV programme to the hard disk (HDD). -
Page 21: Adjusting The Recording Duration
Adjusting the recording Recording for Two duration Programmes You can set the recording duration after pressing the z REC button. The recorder can record up to two programmes at once. Also, you can set timer Press REC while recording. recording two programmes at the same time. Adjust the recording duration using Press REC while watching a TV... -
Page 22: Playback
E Icons that indicate types of the titles (z Currently being recorded, Playback N Currently being played, Locked title) Playing Recorded F HDD space Programmes G Colour buttons Activates the same colour function on the screen. H The detailed information of the selected title Select a title using M/m, and press or N. - Page 23 Various playback options Buttons Operations (instant Replays the scene/briefly fast forwards the scene. replay/instant You can change the interval for instant replay/instant advance (page 35). advance) ./> When playing recorded titles: (previous/next) Goes to the beginning/end of the current title. When playing photo/music/video (data) files: Goes to the previous/next file.
-
Page 24: Playing From The Beginning Of The Programme You Are Recording (Chase Play)
To play a specific portion repeatedly Playing from the beginning of (Repeat A-B) the programme you are Press OPTIONS to select “Playback” recording (Chase Play) and then “Repeat A-B” during playback. Press at the starting point (point A) Chase Play allows you to view the recorded of the portion to be played repeatedly. -
Page 25: Playing From The Usb Device
Press TITLE LIST. Playing from the USB The “Title list” appears. Device For playable USB devices, see “Playable types of files” (page 42). Press the same colour button on the remote. • Red button (“Home”): Goes back to the top layer. Red button Blue button •... -
Page 26: Playing Mp3/Video (Data) Files
Select a photo file, and press Playing MP3/video (data) files A slideshow of the photo files in the current folder starts. Follow steps 1 to 3 of “Playing photo • To rotate the image, press </,. To go back to the slideshow, press N files”... - Page 27 Select “HDD” and press Select a folder you want to copy to using < Press the red button (“Select Path”). Copying starts. Wait until the copying status bar disappears. To cancel copying Select “Cancel” in the copying status bar, and press To disconnect the USB device See “To disconnect the USB device”...
-
Page 28: Erasing And Labelling
Labelling a Folder/Title/ Erasing and Labelling File (Rename) Erasing a Folder/Title/ Press TITLE LIST. File (Erase) Select the folder/title/file you want to rename using M/m. Press TITLE LIST. Press OPTIONS to select “Edit” and Select the folder/title/file you want to then “Rename,”... - Page 29 To use the number buttons on the remote Press the number button while the input row is highlighted. • To switch the characters, press the number button repeatedly. • To insert a space, press SUBTITLE. • To switch the character types, press /. Only the characters displayed on the on-screen keyboard can be input with this recorder.
-
Page 30: Copying To An External Hdd Device
Formatting an external HDD Copying to an External HDD Device device Before Copying the Before copying the titles to an external HDD device for the first time, format the external Recorded Titles HDD. When you format an external HDD device, all of the content on the external HDD will be erased. -
Page 31: Copying The Recorded Titles
To cancel copying Copying the Recorded Select “Cancel” in the copying status bar, and press Titles • The titles recorded on this recorder are Connect the external HDD device to compliant with the XFS file system and can be the USB jack on the recorder. played on this recorder only. -
Page 32: Settings And Adjustments
Select the desired setup item using M/m, and press Settings and Adjustments See the explanations in the following sections. Using the System Menu To exit the System Menu Press SYSTEM MENU when you need to Press SYSTEM MENU again. change the settings of the recorder. The default settings are underlined. -
Page 33: Recorder Settings (Setup)
HDMI Resolution Recorder Settings Selects the type of video signals output from the HDMI OUT jack. For details, refer also (Setup) to the instruction manual supplied with the TV, etc. Auto Normally select this. The AV Setting recorder outputs signals starting from the highest TV Type resolution acceptable to the... -
Page 34: Subtitle
Region Setting If the HDMI OUT jack is connected to equipment not compatible with Dolby Digital signals, the PCM signals will be automatically output even when you select “On.” NSW/ACT Select this when in New South Wales/Australian Lip-Sync Adjustment (msec.) Capital Territory. -
Page 35: Playback Settings
Playback Settings Power Management Instant Replay Standby Mode Sets the interval for instant replay Mode 1 During “Standby Mode,” (“15 Sec.”/“30 Sec.”/“60 Sec.”). equipment such as TV connected to the aerial output Instant Advance would not receive TV signal. Sets the interval for instant advance To watch TV, use a splitter to (“30 Sec.”/“60 Sec.”/“120 Sec.”). -
Page 36: Aerial Reception Settings (Channel)
Edit Channel Aerial Reception Settings (Channel) Edit Channel List Erases or locks channels in the “Channel List.” Channel Scan Enter your four-digit password using the number buttons. Full Rescan Select a channel you want to edit using Erases all the registered channels and scans M/m, and press the corresponding the channels again. -
Page 37: Other Settings (Others)
Connection Other Settings (Others) Control for HDMI Diagnostics Allows you to use the “Control for HDMI” function (page 16). System Message Turns off the function. When the recorder has failed to record a title, an error message is displayed. Maintenance System Information Displays the system information. -
Page 38: Additional Information
Should the TV screen. any problem persist, consult your nearest , Set “Standby Mode” to “Mode 2” in the Sony dealer. “Power Management” setup (page 35). , A scrambled channel is selected. Power Picture noise appears. -
Page 39: Recording/Timer Recording
Sound Recording/Timer recording There is no sound. The programme position cannot be , Re-connect all connections securely. changed from the programme position , The connecting cable is damaged. you are recording. , The input source setting on the audio , Set the TV’s input source to “TV.” component or the connection to the audio component is incorrect. -
Page 40: Remote Control
Playback Display The recorder does not start playback from The folder/title/file or station name is not the beginning. correctly displayed. , Resume play was activated (page 22). , Depending on the situation, letters or symbols that the recorder cannot display are replaced with “_.”... -
Page 41: Notes About This Recorder
Others Notes About This Recorder You do not have the password. , The default password is “0000.” To change the password, see “Change Password” in On operation the “Parental Control” setup (page 34). • If the recorder is brought directly from a cold to a warm location, or is placed in a The recorder does not detect a USB very damp room, moisture may condense... -
Page 42: Specifications
Hard disk drive capacity: Specifications 1 TB Mass (approx.): 2.2 kg Operating temperature: 5ºC to 35ºC System Operating humidity: 25% to 80% Transmission standards: AC adaptor: 220 – 240 V AC, 50/60 Hz DVB-T Supplied accessories: Channel coverage: Mains lead (1) VHF: AS6 to AS12 Aerial cable (1) UHF: AS27 to AS69... -
Page 43: Copyrights And Trademarks
If more than one code number is listed, try entering them one at a time until you find the one that works with your TV. Manufacturer Code number Sony 01 (default) Grundig Hitachi 15, 16 LG/Goldstar Loewe... -
Page 44: Notices And Licenses For Software Used In This Product
License; they are outside its scope. The act link: of running the Program is not restricted, and the output from the http://www.sony.net/Products/Linux/ Program is covered only if its contents constitute a work based on the Program (independent of having been made by running the Program). - Page 45 These requirements apply to the modified work as a whole. If 5. You are not required to accept this License, since you have identifiable sections of that work are not derived from the not signed it. However, nothing else grants you permission to Program, and can be reasonably considered independent and modify or distribute the Program or its derivative works.
- Page 46 10. If you wish to incorporate parts of the Program into other Also add information on how to contact you by electronic and free programs whose distribution conditions are different, write paper mail. to the author to ask for permission. For software which is If the program is interactive, make it output a short notice like copyrighted by the Free Software Foundation, write to the Free this when it starts in an interactive mode:...
-
Page 47: Gnu General Public License
GNU GENERAL PUBLIC LICENSE For example, if you distribute copies of the library, whether gratis or for a fee, you must give the recipients all the rights that TERMS AND CONDITIONS FOR COPYING, we gave you. You must make sure that they, too, receive or can DISTRIBUTION AND MODIFICATION get the source code. - Page 48 These requirements apply to the modified work as a whole. If Otherwise, if the work is a derivative of the Library, you may identifiable sections of that work are not derived from the distribute the object code for the work under the terms of Library, and can be reasonably considered independent and Section 6.
- Page 49 7. You may place library facilities that are a work based on the 12. If the distribution and/or use of the Library is restricted in Library side-by-side in a single library together with other certain countries either by patents or by copyrighted interfaces, library facilities not covered by this License, and distribute the original copyright holder who places the Library under this such a combined library, provided that the separate distribution...
- Page 50 Legal Terms Permission is hereby granted to use, copy, modify, and distribute this software (or portions thereof) for any purpose, 0. Definitions without fee, subject to these conditions: Throughout this license, the terms ‘package’, ‘FreeType (1) If any part of the source code for this software is distributed, Project’, and ‘FreeType archive’...
- Page 51 Therefore, by using, distributing, or modifying the FreeType libpng versions 1.0.7, July 1, 2000, through 1.2.5 - October 3, Project, you indicate that you understand and accept all the 2002, are Copyright (c) 2000-2002 Glenn Randers-Pehrson, terms of this license. and are distributed according to the same disclaimer and license as libpng-1.0.6 with the following individuals added to the list 4.
- Page 52 A “png_get_copyright” function is available, for convenient 4. The names “OpenSSL Toolkit” and “OpenSSL Project” use in “about” boxes and the like: must not be used to endorse or promote products derived from this software without prior written permission. For written printf(“%s”,png_get_copyright(NULL));...
-
Page 53: Index
Index Easy Setup 13 Mains lead 13 “Edit Channel” 36 “Maintenance” 37 Words in quotations appear “Edit Channel List” 36 “Manual Daily/Weekly in the on-screen displays. “Edit Favourite List” 36 Recording” 18 “Manual Scan” 36 Viewing a list of “Manual Single Aerial 10 available Recording”... - Page 54 Searching fast reverse/fast forward 23 locating the beginning of the title 23 locating the previous/ next file 23 “Setup” 33 “Signal Information” 37 “Slideshow Time” 35 “Software Update” 37 “Standby Mode” 13 “Subtitle” 34 “System Information” 37 System Menu 32 “System Message”...
- Page 56 © 2011 Sony Corporation Printed in China 4-265-096-22(1)