Alignment Tape - Sony SRW-1 Maintenance Manual

1-19. Alignment Tape

The following describes alignment tapes used for adjustment of this unit.
1. HR5-1B (SONY part No. 8-960-076-31) : For HDCAM SR
Used for video/audio adjustment of the unit.
Time (min. : sec.) Digital video
00:00 - 100 % color-bar
02:00 - 100 % color-bar
04:00 - 100 % color-bar
06:00 - 100 % color-bar
08:00 - 100 % color-bar
10:00 - Ramp
20:00 - Multi Burst
30:00 - 38:00 100 % color-bar
2. HR2-1B (SONY part No. 8-960-076-11) : For HDCAM SR
Used for servo adjustment of the unit.
Time (min. : sec.) Digital video/Digital audio
00:00 - 8T (for A2, A6 and A10 tracks)
(Pulse * ) Marker to SAT IN point of the first frame
20:00 - 27:00 2T (All CH)
*: The time code data is not recorded on the time code track during pulse portion (00:00 to 20:00). This portion is recorded the duty 7:3
pulse on the CTL track. Therefore, when playing back this portion, time data which is interpolated by the time code signal is displayed.
1-32 (E)
Digital audio
1 kHz sine wave, _20 dB FS
1 kHz sine wave, 0 dB FS
_∞ dB FS
20 Hz sine wave, _20 dB FS
20 kHz sine wave, _20 dB FS Repeat
Repeat
Repeat
_∞ dB FS
CUE track CTL track
1 kHz 0 VU CTL
1 kHz _20 VU
CTL
12 kHz _20 VU
CTL
Repeat CTL
CTL
Repeat CTL
_ CTL
_ CTL
CUE track CTL track
_ CTL
_ CTL
SRW-1