Network Repeater Loopback (G.703) - Paradyne 7974 User Manual

Testing

Network Repeater Loopback (G.703)

"
8-14
Network Repeater Loopback (RLB) loops the signal being sent from the data port
back to the data port.
Activating the Network Repeater Loopback test causes the EOC, used for
management, to be lost to the remote unit.
CAP CAP
DSL
Port
Transceiver Framer
Procedure
To run a G.703 Network Repeater Loopback:
1. Position the cursor at the Start command next to Network Repeater
Loopback on the Network & G.703 Tests screen.
2. Press Enter.
The Start command is changed to Stop.
3. To manually stop the test, verify that the cursor is positioned at the Stop
command and press Enter.
A G.703 Network Repeater Loopback cannot be started when any other loopback
test is in progress.
August 2000
E1
G.703
LIU
Port
Framer
00-16825
7900-A2-GB21-00