About The Model 7976 Standalone Termination Unit; M/Sdsl Overview - Paradyne HotWire 7976 User Manual

About the Model 7976 Standalone
Termination Unit

M/SDSL Overview

7976-A2-GB20-10
Hotwire Multirate/Symmetrical Digital Subscriber Line (M/SDSL) products
maximize customer service areas by varying the DSL line rate. This ensures
symmetric DSL connectivity over a wide range of telephone line distances and
transmission line qualities.
Hotwire M/SDSL products can transport at full or fractional payload rates over a
2-wire, full-duplex circuit over varying distances based on the conditions of the
2-wire loop. Examples include support for router, multiplexer and PBX
connections on 24 gauge (.5 mm) cable at greater than 14,000 feet (4.6 km)
delivered at 2.048 Mbps.
Hotwire M/SDSL units are equipped with an automatic configuration capability
that reduces the M/SDSL installation process to a simple plug and play mode.
Simply connecting the units to the line automatically configures the customer for
the maximum data rate supported by the local loop. M/SDSL units can also be
configured at fixed line speeds.
August 1998
1
1-1