Configuration Software; Software/Firmware Installation - Extron electronics ISS 608 User Manual

Configuration
Software
The ISS switcher can be easily configured using Extron Product Configuration Software
(PCS). The graphical interface includes the same functions as those on the device front
panel with additional features that are available only through the software.
This section describes the software installation and communication (see the
ISS 608 and ISS 612 PCS Help File for detailed control information). The topics covered in
this section are:
•
•
•

Software/Firmware Installation

Visit
NOTES:
1.
2.
3.
Software/Firmware Installation
Connecting to PCS
Software Overview
www.extron.com to download and install the PCS software.
• Also download the latest versions of software and firmware for your product.
• An Extron Insider account is required to download either firmware or software
Mouse over the Download link at the top of the page (see figure 25,
Figure 25. Software Links on Download Screen
Click the appropriate link on the drop-down list.
For software, either click the Software link (
directly on that link (see the PCS Product Configuration Software link
to step 5 on page 61.
For firmware, click the Firmware link (
If there is no direct link to your software, click the Software link (
ISS 608 and ISS 612 Seamless Switchers • Configuration Software
) or, if the software is listed, click
2
).
4
2
).
1
) and skip
3
).
60