Time Setting; Firmware Upgrade - UNI-T UT8805E Manual

Function menu
Lang
Beeper
Light
Format
About
Done
1) Language
8805E supports both Chinese and English menu, and the operation menu and help options will be
displayed in the selected language.
2) Beeper
Press [Beeper] to turn the beeper on or off. By each click, the beeper will beep, and it also beeps
during the continuity measurement.
3) Backlight
Adjust the backlight of the display.
4) Format
There are three formats of input value -- none, comma and space. Take 2V in three formats as an
example: 2.00000V, 2.000, 00V and 2.000 00V.
5) About
Check the system information, includes machine model, software version, hardware version, serial
number and other information as Figure 2-36.

2.5.3 Time Setting

Press [Time] to set the time from year to minute by direction buttons. Press [Done] to save and exit, the
timing circuit is powered by internal battery.

2.5.4 Firmware Upgrade

U-disk firmware upgrade is allowed.
Steps:
1) Copy the upgrade files by U-disk.
2) Insert the U-disk into the USB Host interface on front panel.
3) Press [Shift] → [Dual] → [Upgrade], and press [Locate], and then press direction buttons to select the
upgrade files, then press [Select] → [OK] to start upgrading.
Description
Language of menu setting
Turn the beeper on/off
Adjust backlight between 10%, 30%, 50%, 70%, 90% and
100%
The digits format in menu
Check the system version
Return to previous menu
Figure 2-36 system information
31
UT8805E Benchtop Digital Multimeter