IBM XStation 130 Set Up And Operation Manual page 69

1\111,
Starting Diagnostics
If you are logged on to the host system, record all of the information that identifies the
problem. Log off the system, (hold down the Ctrl and Alt keys, and then press the Backspace
key) and turn the Xstation power oft. Go to "Starting the Xstation" on page 2-2 to exercise
the Power-Qn-Self-Test (POST) before starting diagnostics.
To enter diagnostics: while the Xstation is displaying a POST error or just as the LAN
statistics screen appears, hold down the Ctrl key, and then press the Break key; when both
keys are released, the Main Menu should be displayed.
Main Menu
1. Terminal configuration
2. Test the terminal
3. Select Token-Ring data rate
4. Fixed disk format
5. Select language
Use
t
or
+
to select. Press Enter.
Esc
=
Quit F1
=
Help
Note:
Option 3 in the Main Menu is displayed only if a Token-Ring adapter is installed.
Option 4 is displayed if the disk drive is installed. Option 5 is displayed in World
Trade versions only. Option numbers will vary according to the installed options. If
the Main Menu is not displayed, follow your normal hardware service procedure.
Diagnostics
3-9